Dear all
anyone having risk assessment and EIA(Environ Impact Assessment) for construction electrical activity
if anyone having details kindly send me as earliest.
Regards
Ashokkumar.P
From United Arab Emirates, Dubai
1anyone having risk assessment and EIA(Environ Impact Assessment) for construction electrical activity
if anyone having details kindly send me as earliest.
Regards
Ashokkumar.P
<image no longer exists>
From United Arab Emirates, Dubai
Dear ashok,
I was wrote some tips its help to prepare RA for electrical
1. Must have PPE overalls, safety footwear, safety glasses.
2. Check/secure area adjacent to work.
3. Check for working at heights
4. Check for manual handling .
5. Check with supervisor whether extra operative needed.
6. Consider risks and hazards in work area. Refer any concerns to supervisor. Are relevant
permits in place?
Hazards
1. Falls from heights.
2. Eye and hand injury.
3. Electrocution.
4. Manual Handling.
5. Fire.
Harm
1. Burns or fatalities may arise from contact with live conductors.
2. Back injuries, fractures to fatality from fall.
3. Musculoskeletal injuries from torque/sudden movement of hand tools and lifting.
Control measures
1. All installations of electrical supplies to be carried out by qualified electricial staff.
2. Ensure work area is suitably cleared and notices posted.
3. Ensure all local personnel are informed of work being carried out.
4. Use only approved equipment and tools if competent in their use.
5. Maintain work area in a tidy state.
6. Install equipment and cables in accordance with IEE Regulations.
7. Carry out required electrical tests to new circuit prior to making it live.
On completion
1. Tidy up, remove and dispose of redundent materials.
2. Sign off any relevant permits.
3. Sign off job on completion.
Hope its helps. . .
From United States, Fpo
I was wrote some tips its help to prepare RA for electrical
Prior to work commencement
1. Must have PPE overalls, safety footwear, safety glasses.
2. Check/secure area adjacent to work.
3. Check for working at heights
4. Check for manual handling .
5. Check with supervisor whether extra operative needed.
6. Consider risks and hazards in work area. Refer any concerns to supervisor. Are relevant
permits in place?
Hazards
1. Falls from heights.
2. Eye and hand injury.
3. Electrocution.
4. Manual Handling.
5. Fire.
Harm
1. Burns or fatalities may arise from contact with live conductors.
2. Back injuries, fractures to fatality from fall.
3. Musculoskeletal injuries from torque/sudden movement of hand tools and lifting.
Control measures
1. All installations of electrical supplies to be carried out by qualified electricial staff.
2. Ensure work area is suitably cleared and notices posted.
3. Ensure all local personnel are informed of work being carried out.
4. Use only approved equipment and tools if competent in their use.
5. Maintain work area in a tidy state.
6. Install equipment and cables in accordance with IEE Regulations.
7. Carry out required electrical tests to new circuit prior to making it live.
On completion
1. Tidy up, remove and dispose of redundent materials.
2. Sign off any relevant permits.
3. Sign off job on completion.
Hope its helps. . .
From United States, Fpo
Dear Ashok, Does u have any specific questions please come forward we will help to u. . . Keep on sharing & gaining. . .
From United States, Fpo
From United States, Fpo
Risk assesment is very wide field v can't confined to it in very short topic.
As far electrical part & construction is concern we hv to look hazard related with electrical & construction part seprately then in 3rd phase we hv to analys it as combine.
hazard related with electrical is electrocusion ,burn & fire which may result as serious injuries as well as fatalities
hazard related with construction is concern with fall from heights,collapse of structure as demolition well.
under envirometnt protection act is mainly concern with chemical which is annexed in schedule 2 & 3
raj
From India, Bhopal
As far electrical part & construction is concern we hv to look hazard related with electrical & construction part seprately then in 3rd phase we hv to analys it as combine.
hazard related with electrical is electrocusion ,burn & fire which may result as serious injuries as well as fatalities
hazard related with construction is concern with fall from heights,collapse of structure as demolition well.
under envirometnt protection act is mainly concern with chemical which is annexed in schedule 2 & 3
raj
From India, Bhopal
Thank you Mr.raghu and Mr.Raj
kindly send me environment Protection act annex 2 & 3.
actually I have 30 activities in construction electrical including testing and commissioning from raft to slab. my questions are do you have the list of activity for electrical including installation, testing & commissioning?
Environment Impact assessment also pointed out in each activity in risk assessment
If you have any sample , pls send me
Regards
Ashokkumar.P
From United Arab Emirates, Dubai
kindly send me environment Protection act annex 2 & 3.
actually I have 30 activities in construction electrical including testing and commissioning from raft to slab. my questions are do you have the list of activity for electrical including installation, testing & commissioning?
Environment Impact assessment also pointed out in each activity in risk assessment
If you have any sample , pls send me
Regards
Ashokkumar.P
From United Arab Emirates, Dubai
Find answers from people who have previously dealt with business and work issues similar to yours - Please Register and Log In to CiteHR and post your query.
Hazard idendentificati on and risk assessment formula.doc
Poor Risk Assessment.zip
Risk Assessment.ppt