Dear All, What content need to be included for first " Basic Safety Awareness Training "? Regards, Abhay
From India, Mumbai
49From India, Mumbai
Dear Abhay,
Content of a "Safety Awareness Training course" depends upon the duration, level of participants. Noted below are the contents that can be modified to suit your requirement.
1. Impact of an accident (on - you, your family, employer. government, society)
2. Domino theory -(ancestry –fault of person – unsafe acts/conditions –accident -injury/damage)
3. Modern techniques of accident prevention.
4. Use and abuse of personal protective equipment
5. House keeping
6. Fire protection
7. Your role in accident prevention
case studies, quizes, videos may be used effectively
If you can provide exact requirement I may be able to help further.
Regards,
Kesava Pillai
From India, Kollam
Content of a "Safety Awareness Training course" depends upon the duration, level of participants. Noted below are the contents that can be modified to suit your requirement.
1. Impact of an accident (on - you, your family, employer. government, society)
2. Domino theory -(ancestry –fault of person – unsafe acts/conditions –accident -injury/damage)
3. Modern techniques of accident prevention.
4. Use and abuse of personal protective equipment
5. House keeping
6. Fire protection
7. Your role in accident prevention
case studies, quizes, videos may be used effectively
If you can provide exact requirement I may be able to help further.
Regards,
Kesava Pillai
From India, Kollam
Dear Sir, We want to start safety training for our newly established small scale chemical unit ( total strength 35-40 ). category in plant. 1. helpers - 2. operators- 3.Supervisors- B.Sc Abhay
From India, Mumbai
From India, Mumbai
Dear Abhay
Imparting safety training at the start of a unit is quite beneficial.
Being a chemical unit before starting safety training trainer must know the safety aspects of all the raw materials, finished products and process. Safety in transporting, storage and handling of these chemicals are important. It all depends up on what chemicals you have.
Three categories of employees- they all require safety orientation. Even if you do not conduct a separate safety awareness course indoctrination or safety orientation as we usually refer to is essential.
Later they require three different types of training.
Helpers – Training for helpers in their local language.
Impact of an accident (on - you, your family, employer. government, society)
Domino theory -(ancestry –fault of person – unsafe acts/conditions –accident -injury/damage)
Haz.com (Hazard communication)
What to do and what not to do for safety.
Use and abuse of personal protective equipment
House keeping
Fire protection
Your role in accident prevention
Operators:- Along with all the above operators must be trained in safety aspects related to their specific job.
Supervisors: For added responsibility of supervisors they require a higher level of safety training.
Along with all the above topics you may add:
In an emergency
Reporting of accidents
First Aid fundamentals
Knowing your MSDS
There are many things to be covered. Since it is only an awareness course trainer has to touch up on electrical safety, manual material handling etc which may not take much time especially if ppt is used effectively.
With the above the awareness training may take a maximum of 5 hours class room time.
Regards,
Kesava Pillai
From India, Kollam
Imparting safety training at the start of a unit is quite beneficial.
Being a chemical unit before starting safety training trainer must know the safety aspects of all the raw materials, finished products and process. Safety in transporting, storage and handling of these chemicals are important. It all depends up on what chemicals you have.
Three categories of employees- they all require safety orientation. Even if you do not conduct a separate safety awareness course indoctrination or safety orientation as we usually refer to is essential.
Later they require three different types of training.
Helpers – Training for helpers in their local language.
Impact of an accident (on - you, your family, employer. government, society)
Domino theory -(ancestry –fault of person – unsafe acts/conditions –accident -injury/damage)
Haz.com (Hazard communication)
What to do and what not to do for safety.
Use and abuse of personal protective equipment
House keeping
Fire protection
Your role in accident prevention
Operators:- Along with all the above operators must be trained in safety aspects related to their specific job.
Supervisors: For added responsibility of supervisors they require a higher level of safety training.
Along with all the above topics you may add:
In an emergency
Reporting of accidents
First Aid fundamentals
Knowing your MSDS
There are many things to be covered. Since it is only an awareness course trainer has to touch up on electrical safety, manual material handling etc which may not take much time especially if ppt is used effectively.
With the above the awareness training may take a maximum of 5 hours class room time.
Regards,
Kesava Pillai
From India, Kollam
Dear Sir,
Once again thank you very very much. This forum is live because of people like you . I assure you that whatever knowledge about safety I got from this forum I will share to all so that achieve & maintain zero accident status is not remain for some companies but for all companies in India.
Regards,
Abhay
From India, Mumbai
Once again thank you very very much. This forum is live because of people like you . I assure you that whatever knowledge about safety I got from this forum I will share to all so that achieve & maintain zero accident status is not remain for some companies but for all companies in India.
Regards,
Abhay
From India, Mumbai
For chemical factories i would suggest you to go in for
OHSAS 18000 ( Occupational Health & Safety ) Certification
which is accepted globally standard.
It will cover & solve all your queries.
If you are dealing in export
( or in case of domestic too for Branded dealers )
it will boost up your efficiency depending on the report of OHSAS 18000.
For More Enquires ,
Feel Free To Contact On :-
S.K. Gupta
09820143204 ( Mumbai )
ISO 9000 / ISO 14000 / OHSAS Consultant
Reference :- Abhash Agarwal
Abhash Agarwal
Social Compliance Consultant ( Mumbai )
09819728288
From India
OHSAS 18000 ( Occupational Health & Safety ) Certification
which is accepted globally standard.
It will cover & solve all your queries.
If you are dealing in export
( or in case of domestic too for Branded dealers )
it will boost up your efficiency depending on the report of OHSAS 18000.
For More Enquires ,
Feel Free To Contact On :-
S.K. Gupta
09820143204 ( Mumbai )
ISO 9000 / ISO 14000 / OHSAS Consultant
Reference :- Abhash Agarwal
Abhash Agarwal
Social Compliance Consultant ( Mumbai )
09819728288
From India
Dear Abhay
You may also add the following:
1. Incident Pyramid
2. Safety Ice Berg Chart
3. Major hazards and comptrol measures including Chemical Handling, Work at height, Striking object, electricity, vehicle, Confined Space, Fire,etc
With regards,
Dipil
From India
You may also add the following:
1. Incident Pyramid
2. Safety Ice Berg Chart
3. Major hazards and comptrol measures including Chemical Handling, Work at height, Striking object, electricity, vehicle, Confined Space, Fire,etc
With regards,
Dipil
From India
Dear Dipil, Now can you just give me an idea as to "how will you differentiate between a basic safety awareness training and a regular training course please". Regards, Kesava Pillai
From India, Kollam
From India, Kollam
@ Keshav Pillai
Dear Sir
As per my understanding its as follows:
Basic Safety Awarnesss:
It should contain minimum the following:
1. Roles & Responsibility towards safety
2. It should cover all the hazards existing/or may arise in the plant.
3. Emphasising the concept that Incidents are mainly due to Unsafe Act of People
4. Emergency preparedness.
5. Personnel Protective Equipments
6. Housekeeping,etc
Surely the training mode and topic will change depend upon the audiance.
For a regular training course, it is bascially concentrating on a topic... Say an example, if its for Confined Space, that particular session will more concentrate deeply on the safety aspects related to Confined Space.
With regards,
Dipil Kumar V
From India
Dear Sir
As per my understanding its as follows:
Basic Safety Awarnesss:
It should contain minimum the following:
1. Roles & Responsibility towards safety
2. It should cover all the hazards existing/or may arise in the plant.
3. Emphasising the concept that Incidents are mainly due to Unsafe Act of People
4. Emergency preparedness.
5. Personnel Protective Equipments
6. Housekeeping,etc
Surely the training mode and topic will change depend upon the audiance.
For a regular training course, it is bascially concentrating on a topic... Say an example, if its for Confined Space, that particular session will more concentrate deeply on the safety aspects related to Confined Space.
With regards,
Dipil Kumar V
From India
Find answers from people who have previously dealt with business and work issues similar to yours - Please Register and Log In to CiteHR and post your query.
Basic-Safety-Or ientation.ppt
Ladder Safety Tips.zip