1. “Emergency routes and exits must lead as directly as possible to a place of safety” and that procedures for serious and imminent danger must enable the persons concerned to “immediately proceed to a place of safety in the event of their being exposed to serious, imminent and unavoidable danger”.
2. Official Government guidance notes that “good escape routes to a final exit will be of little benefit if the occupants are not able to get out of the building and move quickly to a place of total safety” and that it is “important to consider where people will go once they have evacuated from the premises”. A number of factors should be given consideration when identifying a suitable assembly point including:
Whether final exits lead directly to a place of safety or discharge into an enclosed area (where discharge is to an enclosed area, access to a place of total safety should be available by means of gates or doors that open easily in a manner similar to final exits)
The maximum number of persons to be accommodated at the assembly point at any one time
The type of persons to be evacuated (eg those with mobility issues), how far they can be expected to travel and how they gain access to the assembly point
The route from the building to the assembly point, including issues of illumination, traffic route condition and sign-posting
Whether the assembly point requires illumination and shelter for those who may be vulnerable
The proximity of other building outlets, including ventilation shafts that may allow the issue of smoke, heat or debris
Dangers once away from the building, including busy roads and pedestrian traffic passing the building.
These factors can form part of the overall fire risk assessment for the premises so that any decision can be formally recorded and reviewed where necessary.
From India, undefined
942. Official Government guidance notes that “good escape routes to a final exit will be of little benefit if the occupants are not able to get out of the building and move quickly to a place of total safety” and that it is “important to consider where people will go once they have evacuated from the premises”. A number of factors should be given consideration when identifying a suitable assembly point including:
Whether final exits lead directly to a place of safety or discharge into an enclosed area (where discharge is to an enclosed area, access to a place of total safety should be available by means of gates or doors that open easily in a manner similar to final exits)
The maximum number of persons to be accommodated at the assembly point at any one time
The type of persons to be evacuated (eg those with mobility issues), how far they can be expected to travel and how they gain access to the assembly point
The route from the building to the assembly point, including issues of illumination, traffic route condition and sign-posting
Whether the assembly point requires illumination and shelter for those who may be vulnerable
The proximity of other building outlets, including ventilation shafts that may allow the issue of smoke, heat or debris
Dangers once away from the building, including busy roads and pedestrian traffic passing the building.
These factors can form part of the overall fire risk assessment for the premises so that any decision can be formally recorded and reviewed where necessary.
From India, undefined
The querist wants to probably know the minimum legal distance from building to safety assembly points. It may be given in Fire safety laws of the State concerned.
From India, Pune
From India, Pune
Find answers from people who have previously dealt with business and work issues similar to yours - Please Register and Log In to CiteHR and post your query.
Why do team building activities usually involve games_.pdf
Capability Building.doc