Warning: preg_match(): Unknown modifier 'd' in [path]/showthread.php on line 2297

Warning: preg_match(): Unknown modifier 'd' in [path]/showthread.php on line 2298
What Will Be Happen When Welding Machine Lugs Are Not Proper/damaged - CiteHR

No Tags Found!

SH

Shai89308

Executive Hr

AS

Ammu Shanvi

Human Resource

GS

G SHASHI KRISHNA

Senior Manager - Hr

AH

Aizant HR

Human Resources

MA

MARSHAL

Safety Officer

AK

Anish Katoch

Hr Executive

PR

PranjalR

Hr Recruiter

AP

Alka Pal

Hr Executive

Karthikeyan8195

Management Consultant

MK

Mohit Kumar Puri

Head Marketing

AU

Austex

Accounts Manager


jakeer233
I would like to know arc welding machine's entire hazards and their risk.
Q) If welding machine lugs are not proper, what may be happen(it leads to which risk)?
Warm Regards,
S.S.Jakeer Hussain.

From India, Mumbai
pon1965
604

It may lead to electrocution. — — — — — — — — — — - Pon
From India, Lucknow
Mr.C.R.Saini
37

Dear Hussain,
It may cause electrocution hazard and welding quality will not come good,
- it should proper tight.
- you can use damaged cables for cover and overlap the working cables lugs joint with double tapping.

From India, JaipurJaipur
Kesava Pillai
252

Dear Jakeer,
Hope you have some knowledge on electrical installation.
Check what happens when there is a an improper contact/connection. As the line or equipment is energized, at the point there will be a chance of heavy sparks. Every time it happens, more current will flow and momentarily voltage will increase many folds. Again at these points there is a chance of carbon deposits. Where carbon gets deposited the area becomes blackened and takes more current. Metal will be eaten away. It will cause more and more current to flow and there are many more issues related to the improper lugs.
Apart from safety issues it also affects the welding quality because of variation in current and voltage.
Regards,
Kesava Pillai

From India, Kollam
Syed yousuf Ali
6

Hi zakir Hussain
Hope you got your answer. Lugs / thimble have very important role in welding operation. I hats of to kesava pillai for his well explanation all time.
If lugs are damaged then there is a great risk of electrocution & also a chances of fire . On the other hand the quality of work will get disturb due to improper lugs or connection.
If you need brief explanation then plz follow OSHA 1926 sub part j' title welding.
Yousuf Ali
(Sr EHS Officer)

From India, Bangalore
Syed yousuf Ali
6

Thanks to all seniors specially Mr Kesava pillai & Mr C R Saini for their well guidance in all safety matters & issues. Regards Syed yousuf Ali(Sr EHS Officer)
From India, Bangalore
Jiothish Mohan
1

Dear Hussain if not proper connection of welding machines, may be fire/sparking from legs,over heat,cable damage,electrocution,electric burns,getting poor quality work etc
From India, Srinagar
Find answers from people who have previously dealt with business and work issues similar to yours - Please Register and Log In to CiteHR and post your query.




About Us Advertise Contact Us Testimonials
Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.